R741 Xtrem-Link Mono
Adhesive for Resilient & Flooring Installation
Special features
- One Component Product
- Permanently waterproof
- Can be used indoor and outdoor
- Very high shear and tensile strength
- No VOC or solvents; Achieves LEED points
PDF version
Technical Data Sheet (TDS)
| Product Description |
| R741 adhesive spreads easily and has a non-slump formula that will help insure contact and adhesive transfer because the ridges will bridge normal gaps between the flooring and substrate. It allows fast installation even with complicated patterns due to its strong green grab. There is no flash time required, so installation can commence immediately. Rolling is recommended. It offers superior flexibility and is designed to adapt to seasonal changes. R741 offers extremely high shear strength which makes it suitable for outdoor and indoor use. |
| Pre-Installation Checklist |
| A successful installation requires proper preparation of the subfloor. Read and understand all applicable guidelines and technical data sheets before beginning installation. Follow industry standards and flooring manufacturers' recommendations for subfloor preparation, design, layout, and application of flooring materials. The backing of all flooring material must be solid and sound, and free of anti-adherents. |
| Sub Floor Examination |
| Prior to installation, the subfloor must be checked according to national standards. It must be solid and sound, level, free of indentations, and resistant to pressure and tension. |
| Sub Floor Preparation |
| Depending on the type and condition of the subfloor, a mechanical treatment (e.g. mechanical brushing, grinding, or sanding) may be required. The intensity of such work must be determined at the site by the installer. Dust, paint, residual adhesives, or other surface contaminants must be removed by suitable means. Cleaning the surface with an industrial vacuum cleaner is recommended. Cracks and gaps must be filled with concrete crack filler unless they are expansion joints. Level when necessary to 3/16 inches within 10 feet. Heated subfloors, gypcrete, wooden subfloors, levelers, patches, and lightweight concrete must be primed. Fast curing cementitious leveling or patching compounds might reduce the flash and work time of water-based products due to absorption. |
| Installation Procedure |
| Spread the adhesive with the appropriate notched trowel or use a glue box to spread the adhesive onto the seaming tape. Lay the turf into the adhesive and press down firmly. |
| Storage |
| Place plastic on top of unused adhesive. Remove air pockets between adhesive and plastic. Place silica bags in the pail. Place lid on pail and seal tightly. Store pail in a cool dry place. |
| Limitations |
| When using other than STAUF products in conjunction with STAUF primers, sealers, leveling compounds, or adhesives, STAUF denies any and all responsibility for any ensuing problems and/or damages without prior written authorization from STAUF. |
| Do not install during heavy rain or where water has accumulated. |
| Do not install below 32°F (0°C) or above 100°F (38°C). Use only on approved seaming tapes. |
| In case of an accident, injury, spill, or exposure, see SDS for information. Consult the Technical Data Sheet at www.staufusa.com for updated information. |
| The foregoing representations are based on the results of our most current product and material testing within a controlled environment and are of a non-obligatory advisory nature only. As such, they do not constitute an express or implied warranty of any kind including the Warranty of Merchantability and/or Fitness for a Particular Purpose. Because we have no control over the actual quality of workmanship, materials used, and worksite conditions, STAUF USA LLC will in no event be liable for any incidental and/or consequential damages. Therefore, we strongly recommend that prior on-site testing be conducted to refer to and study the suitability of the product for the intended purpose. With the release of this Technical Information Sheet, all its prior versions become invalid. For warranty and warranty disclaimer information please see our Limited Lifetime Warranty @ www.staufusa.com |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Revision: 2022-04-22 11:40:33 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
