Technical Data Sheet (TDS)

ECP-280 Isolator

Oil Barrier Over Concrete

Special features

Encapsulates oil residues in concrete
Can be used under any urethane levelers and adhesives
Can be used under epoxy and urethane coatings

General Features

Contains no isocyanates
Dries in less than 2 hours
Contains no water
Contains no chlorinated solvents
High solids content
Ozone friendly
Freeze/thaw stable

Installation Features

Low odor
Spreads easily
Excellent penetration of subfloor
Higher temp will shorten drying time
Observe pot life during installation

Long Term Features

Resistant against aging
Suitable for radiant heat systems

VOC (Rule 1168 calc.) [g/L]

84

Viscosity [cps]

A:1300-2000 B: <50 Mix:450

Bond Strength [psi]

> 1000

Shore D Hardness (ISO 7619)

>80

Approved Subfloors

Cutback Mastic (well bonded, not brittle, tested negative for asbestos)
Concrete Slabs

Approved Trowels and Spread Rate

3/8 in. Nap Roller: up to 100 SF/gal. (16 mil)

Drying Time

Approx. 4 hours

Temperature Range during Installation

50-90F (10-32C)

Relative Humidity Range during Installation

20% - 90%

Packing Size

1.2 gal. Metal Pail Part A + 1.2 qt. Metal Can Part B

Density [lbs./gal.]

A:16.9 B: 7.5 Mix: 15.9

Color

Light Grey

Color Hardener

Clear

Mixing Ratio

100 part A + 12 part B by weight
3.7 Parts A + 1 Part B by volume

Pot Life

Approx. 45 min. @ 70F (21C)

pH value of concrete

Resistant up to 14

Storage

Above 14F

Shelf Life

24 Months in original, unopened container

Transportation

UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Epoxide resin), 9, III
UN 2733 POLYAMINES, FLAMMABLE, CORROSIVE, N.O.S. (Isophorone diamine), 3, II

Revision: 2024-11-04 11:49:37