PDF version

Technical Data Sheet (TDS)

CCO-651

Polyurethane Top Coat for FULL flake/quartz ONLY

Special features

UV resistant
Hot tire resistant
Chemical resistant

General Features

Contains no water
Contains no chlorinated solvents
Contains no solvents
Contains no VOC (calc. per CA Rule 1168)
High solids content
Ozone friendly
Freeze/thaw stable

Installation Features

Low odor
High spread rate
Higher temp and RH will shorten drying time
Observe pot life during installation

Long Term Features

Resistant against aging
Suitable for radiant heat systems

Viscosity [cps]

A:800-1300 B:450-700 Mix:1800

Abrasion Resistence (CS-17, 1000g, 1000cycles) [mg]

Coefficient of Friction

0.96 (with sand and flakes)

Dry Film Thickness [mil]

Bond Strength [psi]

>300

Tensile Strength [psi] EN ISO 527

6,250

Elongation at Break [%]

Shore D Hardness (ISO 7619)

Approved Subfloors

Concrete Slabs
Ceramic Tiles
Stone, Terrazzo
Cured Leveling Compounds
Radiant Heated Subfloors
Drywall
Plaster
Stained Concretes (well bonded)

Approved Trowels and Spread Rate

3/8 in. Nap Roller: up to 240 SF/gal (7 mil) over rough surface
3/8 in. Nap Roller: up to 360 SF/gal (4.5 mil) over smooth surface

Drying Time

Approx. 4 hours

Temperature Range during Installation

50-90F (10-32C)

Relative Humidity Range during Installation

30% - 80%

Packing Size

2.5 gal. Metal Combo Pail (A+B)
60 per pallet

Density [lbs./gal.]

A:8.8 B:9.6 Mix:9.1

Color

Clear

Color Hardener

Clear

Mixing Ratio

1 Part A + 1.7 Parts B by volume
2 part A + 3 part B by weight

Pot Life

Approx. 30 min. @ 70F (21C)

pH value of concrete

Resistant up to 14

Shelf Life

24 Months in original, unopened container

Transportation

UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Epoxide resin), 9, III

Revision: 2024-12-03 13:00:05